RAYZAR Automatic | How Does The Antenna Automatically Find Channels?

^___ Quick 16 Quadrant Scan ^___

Power on the antenna and press "SEARCH" to initiate the unit's search sequence. During this sequence, the antenna will stop in 16 locations and scan for available programming. This process takes about 2-3 minutes to complete.

^___ Automatically Finds The Most Channels ^___

After the antenna completes the search sequence, it will point to the location where the most channels are found and use a green LED to indicate the direction it is pointed. If there are any unique channels in the area, up to two will be indicated with an amber LED.

^___ 1 Button Toggle For More Channels ^___

Pressing the search button will toggle the antenna to one of the alternate locations and indicate the antenna's new position with the green LED. The other alternate locations will then be shown in amber.

Pressing search again will move to the second alternate position for a different unique channel. Again, the control panel LEDs will indicate green for the current position and amber for the alternate positions.