All-In-One Awning Anchor & Support System, Universal.
Fits any brand roll-up RV awning, with slot or without slot.
Are you finding that you need to roll your RV awning in whenever you walk away or there's a little wind picking up? What if you could support your awning and anchor it at the same time??
This system will not only help to keep the wind from lifting up on the awning, but also from pushing it down. This all-in-one system is easy to use. The 3-in-1 anchor is for concrete, wood decks, and hard, compacted, or clay type soils. The earth auger can be used for soft and sandy type soils.
ALUMINUM ANCHORING & SUPPORT LEGS
The aluminum support legs are very easily adjustable from 6.5’ to 11.5’ high in 3” increments. It is very easily adjustable with the wire lock pins.
With the concave radius the head supports will accommodate all sizes of awning tubes for security and support. The nylon strap with the adjustable side buckle will go over the tube and secure it to the anchoring and support leg.
3-IN-1 ANCHORING BASE
This anchoring base can be used to anchor to wood decks by using lag bolts in the four corners or anchor to concrete by using concrete anchors. It is also for anchoring in hard compacted or clay type soils by driving two 5/8” rods in the long gated holes on a 45-degree angle in opposing directions.
EARTH AUGER ANCHOR
Secures the support leg to the ground in soft or sandy type soil. This auger has a hole in the top to slide the included anchoring rods into — to help screw it into the ground.
5/8” ANCHORING RODS
These anchoring rods are for use with both the 3-in-1 anchoring base and for helping screw the earth auger into the ground.